Advertisement
(See Figure 3 for Step 5: Installing Hard Drive Cables and Hard Drive)
5. Connect the hard disk drive data cable and power cable to the new hard disk drive. On the
40-pin hard disk drive data cable, the end that connects to the hard disk drive is the end that
contains the keying on cable side of connector. Outside keying end will connect to CPU
board. Install hard drive (4 screws), using a T10 Torx screwdriver. Feed cables from hard
drive through bottom slot of central rib, second slot from rear.
HP E2479A Upgrade Procedures
Figure 3. Installing Hard Drive Cables and Hard Drive
17
Advertisement
