Using The Bluetooth Headset - Motorola DROID Manual

193
CHAPTER 8: Bluetooth on Your DROID
Newer headsets like the Aliph Jawbone
ICON, used here, will automatically pair
with your DROID. Simply put the
headset into pairing mode and turn on
Bluetooth on the DROID—that's all you
have to do!
Pairing will be automatic, and you
should never have to re-pair the
headset again.

Using the Bluetooth Headset

If your headset is properly paired and on, all incoming calls should be routed to your
headset. Usually you can just press the main button on the headset to answer the call or
answer it on the DROID.
Move the phone away from your face (while
the DROID is dialing), and you should see
the indicator showing you that the
Bluetooth headset is in use. In the image
you see that the Bluetooth icon is
activated.
You will also see the options to send the
call to the Speaker or Mute the call. You
can change this at any point while you are
on the call.
Just choose to send the call to any of the options shown, and you will see the small
Speaker icon move to the current source being used for the call (Figure 8–3).