Download Print this page
Sealey SA92.V3 Instruction Manual
Sealey SA92.V3 Instruction Manual

Sealey SA92.V3 Instruction Manual

Air tyre buffing kit

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product
will, if used according to these instructions and maintained properly, give you years of
trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT
IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE
WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Read Instruction
Manual
Follow all workshop safety rules, regulations, and conditions when using the buffing kit.
ü
r WARNING! Disconnect from air supply before changing accessories or servicing.
1.
SAFETY INSTRUCTIONS
ü Maintain the buffing kit in good condition and replace
any damaged or worn parts. Use genuine parts only.
Unauthorised parts may be dangerous and will
invalidate the warranty.
r WARNING! Check correct air pressure is maintained
and not exceeded. We recommend 90psi.
ü Keep air hose away from heat, oil and sharp edges.
Check air hose for wear before each use and ensure
that all connections are secure.
ü Wear approved safety eye/face shield, ear defenders,
and hand protection.
r WARNING! Due to the possible presence of asbestos
dust from brake linings, when working around vehicle brake systems we recommend you wear
suitable respiratory protection.
ü Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
ü Keep children and non essential persons away from the working area.
û DO NOT use the buffing kit for a task it is not designed to perform.
r WARNING! DO NOT use buffing kit if damaged or thought to be faulty.
(Contact Service Agent).
û DO NOT use buffing kit unless you have been instructed in its use by a qualified person.
û DO NOT carry the buffing kit by the air hose, or yank the hose from the air supply.
û DO NOT operate buffing kit if you are tired or under the influence of alcohol, drugs or
intoxicating medication.
û DO NOT carry buffing kit with your hand on the power trigger in order to avoid unintentional
starting.
û DO NOT direct air from the air hose at yourself or others.
ü When not in use disconnect from air supply and store in a safe, dry, childproof location.
© Jack Sealey Limited
Wear Eye
Wear Ear
Protection
Protection
Original Language Version
INSTRUCTIONS FOR:
AIR TYRE BUFFING KIT
SA92.V3
MODEL No:
SA92.V3
Issue:1 - 15/09/15

Advertisement

loading

Summary of Contents for Sealey SA92.V3

  • Page 1 AIR TYRE BUFFING KIT SA92.V3 MODEL No: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions and maintained properly, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS &...
  • Page 2 A quick change coupling may then be used to connect the leader hose to the air line recoil hose. See fig 1 & 2. fig 1 fig 2 Original Language Version © Jack Sealey Limited SA92.V3 Issue:1 - 15/09/15...
  • Page 3 Replace or repair damaged parts. Use genuine parts only. Un authorised parts may be dangerous and will invalidate the warranty. 5.1. Lubricate the buffer daily with a few drops of Sealey air tool oil dripped into the air inlet to prolong its life. 5.2.
  • Page 4 WARNING! – Risk of Hand Arm Vibration Injury. This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately. This tool is subject to the vibration testing section of the Machinery Directive 2006/42/EC. This tool is to be operated in accordance with these instructions. Measured vibration emission value (a): .