Advertisement
Quick Links
Download this manual
See also:
Manual
Appearance
No.
Port
Lens
1
MODE button
2
Infrared
3
receiver module
Display
4
Status indicator
5
SELECT button
6
VPC620
Specification 1: 12x optical zoom and 12x digital zoom
Specification 2: 4x optical zoom and 2.5x digital zoom
VPC600
Specification 1: 12x optical zoom and 12x digital zoom
Specification 2: 8x optical zoom (digital zoom not supported)
Selects a parameter's mode.
Receives infrared signals.
Displays the lens zoom information, such as C02-12X,
C02-8X, or C02-4X, when the camera starts. C02-12X,
C02-8X, and C02-4X indicate 12x, 8x, and 4x optical zoom,
respectively.
Displays settings information when the camera is working
properly.
Displays error codes if self-check or pan-tilt-zoom (PTZ)
errors occur.
Indicates running, sleep, faulty, and upgrade states.
Selects a parameter or its mode.
1
Description
Advertisement
Related Manuals for Huawei VPC620
Summary of Contents for Huawei VPC620
- Page 1 Appearance Port Description Lens VPC620 Specification 1: 12x optical zoom and 12x digital zoom Specification 2: 4x optical zoom and 2.5x digital zoom VPC600 Specification 1: 12x optical zoom and 12x digital zoom Specification 2: 8x optical zoom (digital zoom not supported) MODE button Selects a parameter's mode.
-
Page 2: Installation
Port Description HD-VI port Inputs serial control signals, infrared signals, and 12 V power. Outputs digital visual interface (DVI) or YPbPr video signals. 3G-SDI port Functions as a bayonet-neill-concelman (BNC) connector to output 3G-SDI and HD-SDI signals. 3G = 3rd Generation HD = high definition SDI = serial digital interface The VPC600 does not have this port. - Page 3 (0.31 in.) and depth of 35 mm (1.38 in.). The two holes in the upper part must be parallel to the horizontal plane to ensure that the endpoint is horizontally installed. Then follow the steps in the following figure to install the VPC620 or VPC600.
- Page 4 Normal Place the camera on a flat surface. installation If you have to place the camera on a sloping surface, ensure that the slope is less than ± 15° or the camera may not function properly. Use an optional L-shape bracket to mount the camera on a wall.
- Page 5 When attaching the purchased bracket and VPC620 or VPC600, it is recommended that you use a 1/4"-20UNC screw delivered with the purchased bracket rather than a 1/4"-20UNC screw delivered with the VPC620 or VPC600 because the length of the latter may be too long or too short to hold up the purchased bracket.
- Page 6 time you power it on. Afterward, the camera restores to the position before its power-off each time the camera is powered on. If the HD-VI port of the camera is connected to a TEX0 video terminal, you do not need to connect the power adapter to the camera or press the power button.
-
Page 7: Specifications
CMOS = complementary metal-oxide-semiconductor Lens Optical zoom VPC620: 12x/4x VPC600: 12x/8x Focal length and aperture 12x: f = 3.9 mm to 46.8 mm (F1.8 to F2.8) 8x: f = 3.9 mm to 31.2 mm (F1.8 to F2.8) 4x: f = 3.9 mm to 15.6 mm (F1.8 to F2.2) -
Page 8: Safety Precautions
Category Item Specifications 6.3° (TELE end) to 72° (WIDE end), with a Horizontal angle of view wide-angle lens installed Lowest operating 2 lux (F1.8, 50 IRE) luminance IRE = Institute of Radio Engineers Shutter speed 1/25 seconds to 1/10000 seconds Local camera presets Range: ±... -
Page 9: Troubleshooting
Keep the device dry and prevent it from colliding with other objects during storage, transportation, and operations. During installation and commissioning, ensure that the camera is properly grounded, and do not insert or remove the camera video cables when the camera is powered on. Do not use any power adapter other than the one provided with the device. - Page 10 Why cannot the cameras be controlled after they are connected? Answer The Huawei VPC620 and VPC600 cameras support the Video System Control Architecture (VISCA) protocol and cascade control. Connection method: Use a keyboard that supports the VISCA protocol to connect the cameras.
- Page 11 camera to the seventh camera. If the control is abnormal, check the cables and their connections. Ensure that the cables and their connections are normal. Ensure that the keyboard can properly control the first camera. If the first camera can be properly controlled but the other ones cannot, check the cable length.