Suzuki SX4/SX4 SEDAN Owner's Manual page 106

INSTRUMENT PANEL
Temperature selector/Air conditioning
switch (1)
EXAMPLE
(4)
This is used to select the temperature by
turning the selector.
Also, this is used to turn on and off the air
conditioning system by pushing the switch.
To turn on the air conditioning system,
push in the switch and the A/C indicator
light (4) will come on. To turn off the air
conditioning system, push in the switch
again and the A/C indicator light (4) will go
off.
NOTE:
If the A/C indicator light (4) blinks, there is
a problem in the heating system and/or air
conditioning system. You should have the
system inspected by an
SUZUKI dealer.
4-29
Blower speed selector/Air intake selec-
tor (2)
80J096
This is used to turn on the blower and to
select blower speed.
If the selector is in "AUTO" position, the
blower speed will vary as the climate con-
trol system maintains the selected temper-
ature.
Also, this is used to select the following
modes by pushing the selector.
authorized
(a)
FRESH AIR
When this mode is selected, the indicator
light (a) will come on and outside air is
used.
RECIRCULATED AIR
When this mode is selected, the indicator
light (b) will come on, outside air is shut out
and inside air is recirculated. This mode is
79J096
suitable when driving through the polluted
air such as a tunnel, or attempting to
quickly cool down.
"FRESH AIR" and "RECIRCULATED AIR"
are switched alternately each time the air
intake selector is pushed.
(b)
65D493