Table of Contents
Advertisement
12
electrolux.com
Examples of cooking applications
The relation between the heat setting and the cooking
zone consumption of power is not linear. When you
increase the heat setting it is not proportional to the
increase of the cooking zone consumption of power.
It means that the cooking zone with the medium heat
setting uses less than a half of its power.
IMPORTANT
The data in the table is for guidance only.
Heat
Use to:
Time
setting
Keep cooked foods warm
as required
1
1-3
Hollandaise sauce, melt: butter,
5 - 25 min
chocolate, gelatine
1-3
Solidify: fluffy omelettes, baked
10 - 40 min
eggs
3-5
Simmer rice and milk based
25 - 50 min
dishes, heating up ready-cooked
meals
5-7
Steam vegetables, fish, meat
20 - 45 min
7-9
Steam potatoes
20 - 60 min
7-9
Cook larger quantities of food,
60 - 150 min
stews and soups
9-12
Gentle fry: escalope, veal cordon
as necessary
bleu, cutlets, rissoles, sausages,
liver, roux, eggs, pancakes,
doughnuts
12-13
Heavy fry, hash browns, loin
5 - 15 min
steaks, steaks
14
Boil large quantities of water, cook
pasta, sear meat (goulash, pot
roast), deep fry chips
Boil large quantities of water.
Power management is activated.
The Power function is suitable for heating large quantities of water.
Information on acrylamides
Important! According to the newest scientific knowledge,
if you brown food (especially food that contains starch),
acrylamides can pose a health risk. Thus, we recommend
that you cook at the lowest temperatures and do not brown
food too much.
Hints
Nominal
power
consumption
Cover
3%
Mix occasionally
3-8%
Cook with a lid on
3-8%
Add at least twice as much
8-13%
liquid as rice, stir milk dishes
part way through
Add some tablespoons of
13-18%
liquid
Use max. 1⁄4 L water for 750 g
18-25%
of potatoes
Up to 3 L liquid plus
18-25%
ingredients
Turn halfway through
25-45%
Turn halfway through
45-64%
100%
CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
IMPORTANT
Scratches or dark stains on the glass ceramic have no
effect on how the appliance operates.
To remove the dirt
1. Remove immediately: melted plastic, plastic foil, and
food with sugar. If not, the dirt can cause damage to
the appliance. Use a special scraper for the glass. Put
the scraper on the glass surface at an acute angle and
move the blade on the surface.
TROUBLESHOOTING
Problem
Possible cause
Red rings, limescale or water
Cooktop surface has not been cleaned
rings, shiny metallic or other
correctly. Cleaning/ maintenance of the
discolouration, scratches/
cooktop surface is not covered under
shadows, bubbles or other
warranty. If a service call is placed to
miscellaneous marks or stains on
clean the cooktop you will be charged for
ceramic glass cooktop surface.
the visit.
Pitting of ceramic glass surface.
Spillovers of liquid with high sugar
content.
You cannot activate the
• You touched 2 or more sensor fields at
appliance or operate it.
the same time.
• The Stop+Go function operates.
• There is water or fat stains on the
control panel.
An acoustic signal sounds and
You put something on one or more
the appliance deactivates. An
sensor fields.
acoustic signal sounds when
the appliance is deactivated.
The appliance deactivates.
You put something on the sensor field.
The residual heat indicator does
The cooking zone is not hot because it
not come on.
operated only for a short time.
The Automatic Heat Up function
The cooking zone is hot.
does not operate.
The highest heat setting is set.
The heat setting changes
The Power management is activated.
between two levels.
Remove after the appliance is sufficiently cool:
limescale rings, water rings, fat, stains, shiny metallic
discolourations. Use a special cleaning agent for glass
ceramic or stainless steel.
2. Clean the appliance with a moist cloth and some
detergent.
3. At the end rub the appliance dry with a clean cloth.
Remedy
Use a ceramic glass cleaner such
as Cerapol.
These types of spills must be removed
immediately with a special scraper for the
glass. If not permanent damage to the
cooktop glass can occur which is not
covered under warranty.
Activate the appliance again and set the
heat setting in less than 10 seconds.
Touch only one sensor field.
Refer to the chapter "Operating instructions"
Clean the control panel.
Remove the object from the sensor fields.
Remove the object from the sensor field.
If the cooking zone operated sufficiently
long to be hot, speak to the service centre.
Let the cooking zone become sufficiently cool.
The highest heat setting has the same power
as the Automatic Heat Up function.
Refer to "Power management".
13
Advertisement
Table of Contents
