Specifications - Panasonic AG-MYA30G Operating Instructions Manual

5+48V switch
When the switch is set to the ON
position, +48V power (power supply for
a phantom microphone) is supplied to
the corresponding XLR connector
(INPUT1 or INPUT2).
When connecting a unit that is not
compatible with the +48V power, set
the switch to the OFF position.
Connecting a non-compatible unit
when the switch is set to the ON
position may cause the unit to
malfunction.
OCorrelation between CH SELECT switch positions and input signals which are
recorded on the audio tracks
CH SELECT switch
position
CH1•2
CH2
OAdjusting the input level
Use the level controls 1 and ATT switch 4 to adjust the audio input level.
Adjust the level to suit the recording conditions.

Specifications

Ambient operating temperature:
0°C to +40°C (32°F to 104°F)
Ambient operating humidity:
10% to 85% (no condensation)
Weight:
185 g (0.407 lb)
Excluding microphone holder
Dimensions (WkHkD):
69.6 mmk36.6 mmk75 mm
3 1
(2 / inchesk1
4
Excluding microphone holder
XLR connector (INPUT1, INPUT2):
XLR (3 pins) k2 (CH1, CH2)
LINE/MIC switching, high impedance
LINE : 0 dBu
MIC : –50 dBu/–60 dBu (setting selected using ATT switch)
CH1
Signals from INPUT2 connector
Signals from INPUT1 connector Signals from INPUT2 connector
/ inchesk3 inches)
2
6CH SELECT switch
Use this switch to select the audio
track on which to record the audio
signals that are supplied from the unit
connected to the INPUT2 connector.
Recorded audio tracks
CH2
E-8