Advertisement
Read this first!
WARNING:
Before replacing the lamp unit and air filter, be sure to turn the power off and to disconnect the power
plug from the power outlet.
z Electric shocks or lamp breakage can result if this is not done.
Do not disassemble the lamp unit.
z If the lamp breaks, it could cause injury.
Keep the supplied clasp out of reach of children.
Accidentally swallowing them can cause physical harm.
z If swallowed, seek medical advice immediately.
When replacing the lamp unit, turn the power off and allow the lamp to cool for at least one hour
before handling it.
z The cover reaches a very high temperature, so failure to observe this will cause burns.
CAUTION:
Do not touch the fan with your fingers or any other parts of your body when removing the lamp unit
or the air filter.
z Doing so can cause injury.
Avoid touching the edges of the supplied clasp.
Doing so may result in injuries due to the thinness of the clasp and the sharpness of its cut edges.
z Be especially careful while handling the clasp when attaching or removing it.
WARNING: TURN THE POWER OFF AND DISCONNECT THE POWER
PLUG FROM THE WALL OUTLET BEFORE REPLACING THE
LAMP UNIT.
NOTICE (USA only)
Hg-LAMP CONTAINS MERCURY, Manage in Accord with Disposal Laws.
See: www.lamprecycle.org or 1-888-411-1996.
Accessories
Check that the following accessories are included. The numbers enclosed in the < > indicate quantity.
Air filter <1>
(TMZX5229)
Attention
z After unpacking the lamp unit, discard the packaging material properly.
Always follow these precautions
Clasp <1>*
(TENC6193)
* Two supplied with the ET-LAD70W (2 pcs).
ENGLISH-3
Advertisement
