Chapter 2 - Symbol Imager; Introduction; Bar Code Decoder Types - Honeywell Marathon Programming Manual

2
Symbol Imager

Introduction

This section's explanations and instructions are directed toward the Symbol SE4400 /4500 Imager engine in the Marathon add-
on module. Do not scan the bar codes in this section with any other imager or laser engine.
Scan engine manufacturers may offer more bar codes and options than are contained in this section. Note that the bar codes in
this section are only those supported by Honeywell on the device listed above.
Technical Assistance
An asterisk (*) next to an option indicates the default setting.

Bar Code Decoder Types

To change a parameter value: Scan the appropriate bar code in this section. The new value replaces the standard default
value in memory.
Note: Using the imager like a camera (or for OCR decoding) is not supported in this release.
The following SE4400/SE4500 bar code symbologies are supported:
Symbology
Codabar
Code 11
Code 128
Code 39
Code 93
Composites
UPC / EAN
Interleaved 2 of 5
MSI (Plessey)
Discrete 2 of 5
is available if you need help when using the bar codes in this section.
Symbology
Aztec
PDF417
MicroPDF
Code 128 Emulation
Data Matrix
Maxicode
MicroQR
QR Code
GS1 DataBar (was RSS)
Postal Codes
2 - 1