Table of Contents
Advertisement
i POWER/PROTECTED
•
Light in green when the amplifier is
switched on.
•
Light in red when the amplifier is
abnormal and protected.
j SPEAKER OUTPUT
•
Connect to speakers or subwoofers.
k Fuse: 25A x 2
l POWER (GND/REM/+12V)
•
To connect +12V-DC power wire,
ground wire, and remote control wire.
6
EN
All manuals and user guides at all-guides.com
3 Installation
Note
•
Follow all mounting and wiring instructions.
Mount the amplifier in car
You can mount the amplifier either under a seat
or on the rear tray.
Note
•
To avoid interference, do not place the
amplifier too close to the car audio or antenna.
•
The supplied mounting screws are 25mm long.
Make sure that the mounting board is thicker
than 25mm.
1
Place the unit on the location for
installation.
2
Mark the positions of the four screw
holes.
3
Drill the holes with driller of
approximately 4mm in diameter.
4
Mount the unit with the supplied screws.
Advertisement
Table of Contents
