Tools Required - Craftsman 45277 Operator's Manual

iii+++++++ .....
Hardware and other included contents can be found in the
bottom drawer (unless otherwise noted).
TOOLS REQUIRED:
1/2" Wrench 5/16" Wrench
Scissors Screwdriver
Hardware Included:
10+24 x 5/16 Hex Screw
(Qty: 24)
5/16 + 18 x 1 Hex Screw (Qty: 4)
Chest:
Drawer Liner Roll (Qty: 1)
Drawer Dividers (Qty: 6)
Literature
Hardware bag
CHEST ATTACHMENT (if purchased)
Items Needed:
5/16 + 18 x 1 Hex Screw (Qty.: 4)
1/2" Wrench
Process:
+Remove the wooden top from the cart.
+Remove the top two drawers of the cart (refer to the
drawer removal instructions).
Lift the chest onto the cart. Line up the holes in the
bottom of the chest with the holes in the top of the cart.
Attach the chest using (4) screws inserted from the
underside of the top of the cart. (See Figure 8)
Wrench tighten all screws.
Replace the drawer (refer to drawer installation instruc+
tions).
+To remove, reverse procedure.
Figure 1
Drawer Liner Roll
Drawer Divider
Figure 2