Sound System - Toshiba A200 Series User Manual

Monitor
Refer also to Chapter 8,
documentation.
Problem
Monitor does not turn on Make sure that the external monitor's power
No display
Display error occurs
Monitor goes into
panning mode

Sound system

Problem
No sound is heard
User's Manual
Optional Devices, and to your monitor's
Procedure
switch is on. Confirm that the external monitor's
power cable is plugged into a working power
outlet.
Try adjusting the contrast and brightness controls
on the external monitor.
Press hotkeys Fn + F5 to change the display
priority and make sure it is not set for the internal
display.
Check that the cable connecting the external
monitor to the computer is attached firmly.
If problems persist, contact your dealer.
Check your monitor specification. It might not
support the selected resolution and refresh rate.
The resolution on the monitor might go into
panning mode when wide screen resolution is
selected. Refer to Appendix B,
Procedure
Adjust the volume control dial.
Check the software volume settings.
If appropriate, make sure the headphone
connection is secure. Check Windows Device
Manager and ensure the sound function is
enabled and that settings for I/O address,
interrupt level and DMA are correct for your
software and do not conflict with other hardware
devices that you have connected to the
computer.
If problems persist, contact your dealer.
Troubleshooting
Display Modes.
9-9