Processing method of the cable terminal
Strip the cable sheath from the tip for the strip length.
Attach the bar solderless terminal to the stripped area.
(1)
(1) Strip length
A recommended strip length is 13mm.
Wiring to terminal block
■Connecting a cable
Fully insert a wire having a bar solderless terminal into a wire insertion opening, and push the wire in. After inserting the wire,
pull it lightly to check that it is securely clamped.
6
Incomplete connections may cause short circuit, fire, or malfunction.
■Disconnecting a cable
Push in the open/close button of the wire to be disconnected using a flathead screwdriver. Pull out the wire with the open/
close button pushed in.
6 INSTALLATION AND WIRING
33
6.2 Wiring Method