Control Elements On The Unclean Side - Miele PW 6163 Operating Instructions Manual

Description of the machine
a
Control elements on the unclean
side
a Display
1 Thermal disinfection
2 Thermal disinfection RKI
3 Chemo-thermal disin.
i
After switching on the "Welcome" display will
appear for a short time followed by the
programme list. The most recently used
programme is highlighted.
b Function buttons
These buttons have specific functions
depending on the status of the machine.
These functions will be listed in the display
above the buttons and will be highlighted
once selected.
If the machine is reprogrammed to "Direct
button allocation" the first 6 programmes
listed in the display can be selected directly
via these buttons.
c START button
The lightring will flash when a selected
programme can be started. Pressing the
Start button will start the programme. After a
programme has started, pressing this button
will show the display as it was before the
start of the programme.
10
b
90 °C
90 °C
60 °C
FC A
c d e
d PC / Optical interface
This interface is used for transferring data to
the control unit from a PC and vice versa.
Connection is from the front via the optical
interface on the control panel.
e Rotary selector
Turning the selector brings up options and
menus in the display.
Pressing the selector confirms your
selection.
f Chip card reader
When a chip card is inserted, the
programmes on the chip card can be used.
Insert the card in the direction of the arrow
(on the card).
g I Mains on switch
Switches the machine on.
h 0 Mains off switch
Switches the machine off.
i Emergency stop switch
Only for use in an emergency.
Press the red button to switch the machine
off. After the problem has been resolved,
turn the red dial clockwise to release it.
Then press the START button to continue the
interrupted programme.
f g h i