Page 3
Class B digital circuitry of this device complies with Canadian ICES-003. This device complies with Industry Canada license-exempt RSS standard(s). Operation is The CMHT77637 tool emits a visible laser beam, as subject to the following two conditions: (1) this device may shown in Figure # 1.
Setup View the measurement on the display window (Figure #2). Attaching the Wrist Strap Changing the Unit of Measure While facing the front of the tool, insert the thin end of Once the current measurement is taken, you can change the wrist strap through one of the holes in the lower the unit of measure from decimal ft (6.21 ft) to fractional right corner of the tool.
Page 5
Limited Lifetime Warranty Craftsman Tape Measures Sold After September 2018 (Model # starting with “CMHT”) Limited Lifetime Warranty If the product fails to perform due to defects in material or workmanship, we will replace it. Proof of purchase is required.
Error Codes Code Description Corrective Action Received Signal Too Weak or Use a target plate or change the target surface. Measuring Time Too Long Received Signal Too High The target is too reflective. Use a target plate or change the target surface.