DeWalt DC509 Manual page 17

8 Stay alert
Watch what you are doing. Use
common sense. Do not operate the tool
when you are tired.
9 Use appropriate tool
The intended use is described in this
instruction manual. Do not force small
tools or attachments to do the job of a
heavy-duty tool. The tool will do the job
better and safer at the rate for which it
was intended. Do not force the tool.
WARNING! The use of any accessory
or attachment or performance of any
operation with this tool other than
those recommended in this instruction
manual may present a risk of personal
injury.
10 Check for damaged parts
Before use, carefully check the
tool and mains cable for damage.
Check for misalignment and seizure
of moving parts, breakage of parts,
damage to guards and switches and
any other conditions that may affect
its operation. Ensure that the tool
will operate properly and perform its
intended function. Do not use the tool
if any part is damaged or defective. Do
not use the tool if the switch does not
turn it on and off. Have any damaged
or defective parts replaced by an
authorised D WALT repair agent.
E
Never attempt any repairs yourself.
11 Remove the battery pack
Remove the battery pack when not in
use, before changing any parts of the
tools, accessories or attachments and
before servicing.
12 Store idle tools
When not in use, tools must be stored
in a dry place and locked up securely,
out of reach of children.
13 Maintain tools with care
Keep the tools in good condition and
clean for better and safer performance.
Follow the instructions for maintenance
and changing accessories. Keep all
handles and switches dry, clean and
free from oil and grease.
14 Repairs
This tool is in accordance with the
relevant safety regulations. Have your
tool repaired by an authorised D
repair agent.
Repairs should only be carried out by
qualifi ed persons using original spare
parts; otherwise this may result in
considerable danger to the user.
Additional safety instructions for
fl ashlights
• Do not look directly into the beam of
light.
• Do not touch the lens surface during or
immediately after use. Allow the tool to
cool for several minutes before storing
or servicing it.
• Do not expose the tool to wet or damp
conditions.
• Do not cover the light with a cloth or
other fl ammable materials in order to
avoid fi re hazard.
• Do not operate the light without lens
cover assembly attached.
Package contents
The package contains:
1 Flashlight
1 Instruction manual
• Take the time to thoroughly read
and understand this manual prior to
operation.
Description (fi g. A)
WARNING: Never modify the
fl ashlight or any part of it.
Damage or personal injury could
result.
INTENDED USE
The DC509/DC519 heavy-duty fl ashlights
are designed to operate on 36 V or 28V
battery packs and can be used as a
handheld model or as a standing model.
DO NOT use under wet conditions or in
presence of fl ammable liquids or gases.
E N G L I S H
WALT
E
15