Replacing The Old Bib Board With The New Bib Board - Huawei PDU8000-0125DCV8-BXA001 User Manual

PDU8000-(0125, 0250, 0400, 0630, 0800)
DCV8-BXA001 Battery Circuit Breaker Box
User Manual
6
Replacing the Old BIB Board with the
If four old BIB boards are cascaded, this chapter describes how to replace the second old BIB board as
an example.
Step 1 Open the door of the BCB box.
Step 2 Switch the BCB box circuit breaker to OFF.
Step 3 Remove the cable from the old BIB board and mark the connection position.
Step 4 Remove the bolts from the old BIB board and remove the BIB board.
Figure 6-1 Removing the bolts from the BIB board
Step 5 Install a new BIB board and connect the cable.


Issue 03 (2019-05-20)
You need to connect the cable connected to the J1 port on the old BIB board to the J1 and J2 ports
on the new BIB board, and you need to make a new cable.
You need to connect the cables connected to the J5, J6, and J7 ports on the old BIB board to the J5,
J6, and J7 ports on the new BIB board.
Copyright © Huawei Technologies Co., Ltd.

6 Replacing the Old BIB Board with the New BIB Board

New BIB Board
41