Epson L3150 Start Here

L3150
Start Here
Read these instructions before using your product.
1
Unpack
Note: Do not open the ink bottles until you are ready to fill the ink
tanks. The ink bottles are vacuum packed to maintain reliability.
Remove all protective materials from the product.
Note: Do not turn on the product yet.
2
Fill ink tanks
Caution:
• This product requires careful handling of ink. If ink spills, wipe it off
immediately with a damp towel to avoid permanent stains. If ink
gets on your clothes or belongings, it may not come off.
• Epson cannot guarantee the quality or reliability of non-genuine ink.
The use of non-genuine ink may cause damage that is not covered
by Epson's warranty.
Warning: Keep the ink bottles out of the reach of children and do not
drink the ink.
1
Open the ink tank cover and the cap for the black ink
tank.
Note: Refer to the color-coded sticker on the ink tank unit to
identify the color of each tank.
2
Unpack the black (BK) ink bottle. Hold the ink bottle
upright and slowly turn the bottle cap to remove it.
Caution: Do not shake or squeeze the ink bottles. Do not touch
the top of the ink bottle after its cap is removed.
3
Position the top of the ink bottle along the front of the
filling port, then slowly stand the bottle upright to insert it.
Note: Do not force the bottles into position; they are keyed for
each color.
4
Wait for the ink to fill the tank. Do not squeeze the bottle.
Note: Ink flows into the tank and stops automatically when the
ink tank is filled to the upper line. If ink does not flow from the
bottle, lift and reinsert the bottle.
5
When the ink tank is full, remove the ink bottle and
securely close it with the bottle cap.
Note: Do not leave the ink bottle inserted; otherwise the bottle
may be damaged or ink may leak. If any ink remains in the bottle,
store the bottle upright for later use.