Sony CCB-WD1 Help Manual page 13

You can change the shooting settings for the cameras. Select the desired setting from the pull-down menu for each
setting item.
Click next to a setting title to collapse the items. Click
"Box" tab
You can set the synchronization signal, update the software, or initialize all of the connected camera control boxes using
the "Box" tab.
Video Sync Signal Setting (Settings for the video synchronization signal)
You can set the video synchronization signal for synchronizing the connected cameras. Select a frame rate according to
the movie recording settings on the cameras.
"Video Sync" appears in the shooting information field (camera information area) during exposure synchronization.
"TC Sync" appears in the shooting information field (camera information area) during time-code synchronization.
Select MENU →
time-code synchronization.
If you add a camera control box to the network after the date has changed, the time code for the added camera
control box will be desynchronized even if you have already performed time-code synchronization. In this case,
restart the camera control box whose MASTER/CLIENT (Master/Client) switch is set to MASTER.
If the selected synchronization signal is different from the recording setting on the camera, synchronization will not be
performed.
When you use the HDMI output function, set the frame rate in the HDMI output settings according to the recording
settings on the camera.
Set the recording setting for HFR shooting to 24p when you are using the cameras in the NTSC mode and want to
synchronize them in the HFR shooting mode.
You cannot perform time-code synchronization when the recording format is set to MP4, or in the HFR shooting
mode.
Firmware update (Software update)
You can update the software of the camera control box. All of the camera control boxes in the same network can be
updated at once.
Download the update file from the designated website in advance.
Do not disconnect the cables or shut down the power source while updating. This may cause the product to
malfunction.
For the latest information on software updates, refer to the product website.
(Setup) → [TC/UB Settings] → [TC Run] → [Free Run] on each camera when you perform
next to a setting title to expand it.
13