Front Panel 3 - Panasonic AK-HRP1005G Operating Instructions Manual

Front panel 3

1 [GAIN] button
2 [SHT] button
1 2 3 4
5 6 7 8
Use this button to display the white balance menu.
"09 RGB GAIN" (see page 71)
Status displays
Lit The current value matches that configured in the reference file.
green:
Lit The current value does not match that configured in the reference file.
red:
Off: Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
Use the [REF.RECALL] button to load a reference file.
n
The reference file settings will be applied to the CCU settings.
Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
n
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
Use this button to display the shutter menu.
"03 SHUTTER SPEED" (see page 65)
Status displays
Lit The current value matches that configured in the reference file.
green:
Lit The current value does not match that configured in the reference file.
red:
Off: Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
Use the [REF.RECALL] button to load a reference file.
n
The reference file settings will be applied to the CCU settings.
Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
n
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
- 24 -
Parts and their functions