Listening To A Cd; Listening To The Radio - Sharp CD-BA1300H Owner's Manual

5

Listening to a CD

4 5
12 cm (5")
8 cm (3")
1
2
8
5
3,6
7
6

Listening to the radio

1
4
3
2
7
Listening to a tape
1
6
4
5
3 3
PUSH PUSH
EJECT 2 2 EJECT
TAPE 1 TAPE 2
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the OPEN/CLOSE button to open the disc tray.
4
Place the CD(s) on the disc tray, label side up.
5
When loading a third disc, press the DISC SKIP button
to turn the disc tray, then place the CD in the open pos-
ition.
6
Press the OPEN/CLOSE button to close the disc tray.
7
Press the button.
8
Adjust the sound volume using the VOLUME buttons.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button to select FM ST, FM
or AM.
3
Press the TUNING/TIME ( or ) button to tune in-
to the desired station.
4
Adjust the sound volume using the VOLUME buttons.
1
Press the ON/STAND-BY button to turn the power on.
2
Open the cassette door by pushing the area marked
"PUSH EJECT".
3
Load the cassette into the TAPE 1 or TAPE 2 cassette
compartment.
And then, close the cassette door completely until it is locked.
4
Press the TAPE (1 2) button to select the TAPE 1
or TAPE 2.
5
Press the button to start playback.
6
Adjust the sound volume using the VOLUME buttons.
8
Recording from CDs
1
4
3
5
2
PUSH
EJECT
TAPE 2
Resetting the microcomputer
2
1,2
2
CD pickup cleaning
Clean the dust or stain on the CD pickup lens
using a commercial cleaning disc (brush type).
1
Press the ON/STAND-BY button to turn the power on.
2
Load a cassette into the TAPE 2 cassette compartment.
3
Press the CD button and load the desired disc.
4
Press the REC PAUSE button.
5
Press the button.
If this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal
supply voltage due to lightning, etc.) or if it is operated in-
correctly, it may malfunction or the display may not func-
tion correctly. If such a problem occurs, do the following:
1
Press the ON/STAND-BY button to enter the stand-by
mode.
2
Whilst pressing down the button and the
EQUALIZER/X-BASS/DEMO button, hold down the
ON/STAND-BY button for at least 1 second.
"CLEAR AL" will appear.
Caution:
The operation explained above will erase all data stored
in memory including clock and timer settings, and tuner
and CD presets.
Cleaning disc