Table of Contents
Advertisement
2.
Insert the fan-switch shaft through the hole in
the panel and secure the switch with the jam nut
(Figure
5).
3.
Align the D-shaped hole in the knob with the flat
on the inner shaft of the fan-switch shaft
5).
4.
Press the knob onto the switch until knob is fully
seated
(Figure
5).
Installing the Fan-Speed Controller
1.
Align the fan-speed controller to the flange of
the long fan-mount bracket with the electrical
terminals align toward the back of the machine
(Figure
6).
1. Front of the machine
2. Fan-speed controller
2.
Secure the fan-speed controller to the flange of
the long fan-mount bracket
thread-forming screw (#8 x 3/8 inch).
Figure 6
3. Long fan-mount bracket
4. Thread-forming screw (#8
x 3/8 inch)
(Figure
6) with the 2
5
Installing the Wire Harness
(Figure
and Fuse
Parts needed for this procedure:
1
Wire harness
4
Cable ties
1
Fuse (25 A)
Installing the Wire Harness
1.
Align the wire harness of the kit to the switch
panel as shown in
g244491
1. Kit-wire harness
2.
Connect the socket terminals of the kit wire
harness to the blade terminals of the fan-speed
controller
table:
Wire Harness—Wire Color
for the Socket Terminals
Violet
Brown
Orange
Optional
Pink
4
Figure
7.
Figure 7
(Figure
8) as shown in the following
Fan-Speed
Controller—Blade Terminal
1—Low
2—Medium
3—High 1
4—High 2
5—Motor
g244638
Advertisement
Table of Contents
