Acer ADK930 User Manual page 13

Using electrical power
• Do not connect the adapter to any other device.
• When unplugging the power cord, do not pull on the cord itself but
pull on the plug instead.
• This product should be operated using the type of power indicated
on the marking label. If you are not sure of the type of power
available, consult your dealer or local power company.
• Do not allow anything to rest on the power cord. Do not locate this
product where people could walk on the cord.
• If an extension cable is used with this product, make sure that the
total ampere rating of the equipment plugged into the extension
cable does not exceed its ampere rating. Also make sure that the
total rating of all products plugged into the wall outlet does not
exceed the fuse rating.
• Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the
branch circuit rating. If power strips are used, the load should not
exceed 80% of the power strip's input rating.
• If this product's AC adapter is equipped with a three-wire grounded
plug, the plug will only fit in a grounded power outlet. Make sure the
power outlet is properly grounded before inserting the AC plug. Do
not insert the plug into a non-grounded power outlet. Contact your
electrician for details..
Warning
The grounding pin is a safety feature. Using a power outlet that is not
properly grounded may result in electric shock and/or injury.
Note
The grounding pin also provides good protection from unexpected noise
produced by other nearby electrical devices that may interfere with the
performance of this product.
• The system can be powered using a wide range of voltages: 100-
120 or 220-240 V AC or 100-240 V AC. The power cord included
with the system meets the requirements for use in the country/
region where the system was purchased. Power cords for use in
Regulatory Information and Safety Guide - 13