Page 1
DOME CAMERA CAMÉRA À DÔME CÁMARA DOMO INSTRUCTIONS TK-C205 MODE D’EMPLOI INSTRUCCIONES For Customer Use: Enter below the Serial No. which is located on the body. Retain this information for future reference. Model No. TK-C205 ® is a registered trademark owned by Victor Company of Japan, Ltd.
Page 2
These are general IMPORTANT SAFEGUARDS and certain items may not apply to all 13. Follow all warnings and instructions marked on the appliance. appliances. 14. Do not overload wall outlets and extension cords as this can result in fire or electric shock. 15.
EXPOSE THIS APPLIANCE TO technician for help. RAIN OR MOISTURE. CAUTION CHANGES MODIFICATIONS APPROVED BY JVC COULD VOID USER’S AVERTISSEMENT: AUTHORITY TO OPERATE THE EQUIPMENT. POUR EVITER LES RISQUES D’INCENDIE OU D’ELECTRO- THIS DEVICE COMPLIES WITH PART 15 OF CUTION, NE PAS EXPOSER THE FCC RULES.
The dome cover will this camera are used where there are ● JVC will not be liable for any damage re- cloud as a result. strong electromagnetic waves or where sulting from the camera dropping due to ●...
Introduction Names and Operations of Parts [AGC - ON/OFF] Auto-gain control switch When setting to PHASE: Body Surface When the [INT/LL] switch is set to Setting this switch to “ON” automatically View when the dome cover is removed. LL, the vertical phase of the line lock increases the sensitivity even when the For instructions on removing the dome cover, see step 4 of “Mounting the Camera to the brightness of the subject is insufficient.
• When the voltage drops due to fluctua- Camera 2 Video signal tions in voltage or compatibility with the Power power supply cable, the current in- Main unit side creases by 30% for each TK-C205. Camera 3 Video signal Power Camera 4 Video signal MONITOR Power DVR, etc.
Installation and connection About Connection Cables Mounting the Camera to the Ceiling Be careful of the following items when connecting the cables. Open hole in ceiling, connect cables and mount camera to ceiling. • Turn OFF the power supply to all components before making connections.
Installation and connection Mounting the Camera to the Ceiling (continued) Point the camera in the direction you Installation Attach to ceiling slab wish to capture. Connect the power supply cable. Point the camera so that the Horizontal Connect the cable protruding from the Lock screw is facing the direction you wish ceiling to the power supply cable.
Installation and connection Connection for Adjustment of the Camera Image inclination The MONITOR terminal is used when making various adjustments to the camera at installa- (adjustable range: ±15°) tion. Rotation levers Manipulate the rotation levers to adjust the IRIS inclination of the image. LEVEL Adjusting the iris level Setting switch...
Others About White-spot correction Specifications Angle adjustment range: Signal system: As a general characteristic unique to CCDs, white-spots may appear on the screen with age. Horizontal: 120° U type based on NTSC standard In order to reduce this phenomenon, this unit is equipped with a white-spot correction feature. E type based on PAL standard Vertical: +80°, –50°...