Battery Using Time Information - LG CineBeam PH450U Owner's Manual

32

Battery using time information

Status
Time and Display
Charging About 3 hours
Up to 2.5 hours
Usage Hours
(Available battery using time up to 2.5 hours when Energy
Saving mode set to Max.)
Battery Level
Step 1
Indicator
• If you do not intend to use the projector for a long time, leave the battery
charged at 40 % to 50 %.
•
The battery is automatically recharged when the projector is connected to a
power supply.
•
Charge the battery fully when you first use the projector.
• The battery standard usage time given in the manual is based on measurements
taken by LG; the actual time may vary depending upon usage.
• Battery usage time may vary depending on broadcast type, operating
temperature, period of use, and user preferences.
•
As the battery is consumable, its lifetime gradually decreases. When the
battery's life is reduced by half, replace it with a new battery from an LG
Electronics Customer Support Center.
• Do not charge the battery using any equipment other than that supplied with
the product. This may damage the battery or cause a fire.
•
Always use a battery that is approved and certified by LG Electronics, Inc. Failure
to do so may result in an explosion or fire.
•
If the battery is leaking or giving off an odor, discontinue its use immediately and
contact LG Electronics Customer Support Center.
•
The battery contains lithium-ion, so please handle with care. Failure to do so may
result in an explosion or fire.
Step 2
Step 1 Step 2
Step 3 Step 4
Step 3 Step 4
Step 5 Full
Step 5 Full