JVC Exad KW-AVX706 Instructions Manual page 45

Menu items
IF Band Width
Area Setting
SIRIUS ID *
8
AV Input
External Input
8
* Appears only when SIRIUS Satellite radio is connected.
* Reverse lamp wire connection is required. See Installation/Connection Manual (separate volume).
9
The rear view through the camera appears on the monitor in "Full" aspect ratio (regardless of the
aspect ratio setting) when you shift the gear to the reverse (R) position.
* 10 The name of the component detected through the CD changer jack is shown.
Selectable settings, [reference page]
Auto: Increases the tuner selectivity to reduce interference
noises between adjacent stations. (Stereo effect may
be lost.)
Wide: Subject to the interference from adjacent stations,
but sound quality will not be degraded and the stereo
effect will remain.
US: When using in North/Central/South America. AM/
FM intervals are set to 10 kHz/200 kHz.
South America: When using in South American countries
where FM interval is 100 kHz. AM interval is set to
10 kHz.
Europe: When using in any other areas. AM/FM intervals
are set to 9 kHz/50 kHz (100 kHz during auto
search).
Your SIRIUS identification number appears on the monitor.
You can determine the use of LINE IN and VIDEO IN plugs.
Off : Select when no component is connected
("AV-IN" is skipped while selecting the
source).
Audio&Video: Select when connecting an AV
component such as a VCR.
Audio: Select when connecting an audio
component such as an MD player.
Camera * 9
: Select when connecting the rear view
camera.
Camera Reverse * 9
: The mirror image of the rear view is
displayed on the monitor. (The monitor
on the receiver only; the normal rear view
appears on the external monitor.)
When connecting an external component to the CD changer
jack on the rear.
Changer/iPod/D. player *
[29, 36]
External Input: Any other than the above.
45
10
: CD changer, iPod, or D. player
[37]
SETTINGS