Dell Optiplex 780 USFF Installation Instructions page 3

Computer and monitor wall mount

Hide thumbs Also See for Optiplex 780 USFF:

Step 4. VESA Monitor Bracket Attachment: Turn the monitor face down on a large flat

surface. Locate the four VESA mounting holes on the rear of the monitor.

a. Determine if spacers are required: Some monitors have a "recess" on the rear

surface. Spacers are provided to fill this gap. See Table A for spacer

length options.

b. Determine Screw Length: Only use the metric M4 screws provided. Screw

length is determined by the spacers used (see Table A).

Outer four holes

Bottom of Monitor

Recess Depth

.250 (1/4)

.500 (1/2)

= 100mm

Spacer

No Spacer Needed

Screws and Spacers are Shown to Scale

Installation Instructions

M4 Screws (4x)

Pivot Assembly

Table A

Screw

10mm

18mm

25mm

Page 3