Using The Windows Shutdown Command; Using The Windows Task Scheduler - Sony Vision Exchange PEQ-C100 System Integration & Services Manual

The following four methods are available for rebooting.

Using the Windows shutdown command



Using the Windows Task Scheduler


Using the Windows WinRM remote management function

Using the WMI command line utility (WMIC)

Using the Windows shutdown command
Main Unit and Pods
In the Windows firewall settings, allow communication on TCP port 445 for file and printer
sharing (SMB inbound).
Vision Exchange does not use the SMB service, so do not enable the SMB service.
Management server or PC
Run the following command.
1. Launch Command Prompt.
2. Run the following command in the Command Prompt window.
Example:
Specify username and password to log in to Vision Exchange with xx.xx.xx.xx IP address.
net use \\xx.xx.xx.xx /user:username (space) password
3. Run the following command to remove the user name and password from the log.
net use \\43.xx.xx.xx /delete
4. Run the command to reboot.
shutdown /m xx.xx.xx.xx /r /f /c "Restart" –t 0
Using the Windows Task Scheduler
This method remotely executes a scheduled task created beforehand in Vision Exchange from
a management server or PC using the Windows schtasks command.
Main Unit and Pods
1. In Task Scheduler, create a reboot schedule.
1. Launch Task Scheduler.
2. Select [Task Scheduler (Local)] at the top left of the window, and click [Create Basic
Task] on the right side of the window.
3. Enter the required information in the Create Basic Task Wizard.
Create a Basic Task: Enter an arbitrary name in [Name].

Trigger: Select [One time].

One time: Enter a past date and time in [Start].

91