Toshiba XM-6802B User Manual page 4

①
CD Tray
➁
Busy Indicator
③
Eject Button
④
Emergency Eject Hole
Insert CD Disc in tray
When you install a disc into the CD-ROM drive, the BUSY light flashes
slowly as it attempts to locate the disc. One of the following will occur:
•
BUSY light goes out. The CD-ROM drive is ready to read data
from the disc.
•
BUSY light flashes slowly. The disc may be dirty.
•
BUSY light remains ON. The CD-ROM is accessing data.
•
BUSY light remains ON indefinitely. The CD-ROM is
experiencing an error
The EJECT button is used to open the disc tray so you can install or
remove a disc
The emergency eject hole is to be used only when the CD tray will not
open when EJECT button is pressed