Load Paper - Epson L1455 Instructions

6
Close the ink tank cap securely.
7
Repeat the previous steps for the other three ink bottles.
Caution: Be sure to close the bottle cap tightly, or ink may leak.
8
Close the ink tank unit cover.
9
Connect the power cord to the back of the product and to
an electrical outlet.
Caution: Do not connect to your computer yet.
10
Turn on the product. Select your language, country, date,
and time, then follow steps 11 and 12 to continue ink
charging.
Note:
• You can change these settings later using the product's control
panel. For more information, see the online User's Guide.
• If an error message appears, turn off the product and check
that no protective material has been left inside the product.
11
Press and hold the
when the message to see the setup manual appears on
the LCD screen.
Cancelar button for 3 seconds
3 seconds
12
Press one of the Iniciar buttons to start charging
the ink. Ink charging takes approximately 20 minutes.
Ink charging is complete when the
flashing.
Note: The ink bottles included with the printer are designed
for printer setup and not for resale. After some ink is used for
charging, the rest is available for printing.
Caution: Do not turn off the product, raise the scanner unit, or
load paper while the product is charging or you'll waste ink.
3

Load paper

1
Make sure the product is not charging, and then pull out
a paper cassette.
2
Lift and remove the paper cassette cover from the paper
cassette. Set the paper cassette cover aside.
3
Slide the side edge guides all the way out and set the
front edge guide to the paper size you are using.
4
Insert paper with the glossy or printable side down.
Note: Make sure the paper is loaded against the front edge
guide and not sticking out from the end of the cassette.
power light stops
20 minutes
LTR