Locking The Video Inputs; Setting The Gametimer - Toshiba 26HF85 Owner's Manual

Locking the video inputs

With the VIDEO LOCK feature, you can lock out the input sources
(VIDEO1, VIDEO2, VIDEO3, COLORSTREAM HD1, COLORSTREAM
HD2, HDMI) and channels 3 and 4.
You will not be able to select the input sources with the TV/VIDEO
button or Channel buttons unless you clear the setting.
To set up the video lock:
1. Press MENU, then press
2. Press L or M to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
4. Press L or M to highlight VIDEO LOCK.
5. Press or to select:
• OFF: Unlocks all video input sources.
• VIDEO: Locks VIDEO1, VIDEO2,
VIDEO3, COLORSTREAM
HD1, COLORSTREAM HD2,
and HDMI.
• VIDEO +: Locks VIDEO1,
VIDEO2, VIDEO3,
COLORSTREAM HD1,
COLORSTREAM HD2, HDMI,
channel 3, and channel 4. This option should be used if you use
the antenna terminal to play a video tape.
6. Press EXIT to return to normal viewing.
To unlock the video inputs:
1. Press MENU, then press
2. Press L or M to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
4. Press L or M to highlight VIDEO LOCK and press
highlight OFF.
5. Press EXIT to return to normal viewing.

Setting the GameTimer

With the GameTimer TM
VIDEO LOCK feature (VIDEO setting) to set a time limit for playing a
video game (30, 60, 90, or 120 minutes.)
To set up the GameTimer:
1. Press MENU, then press
2. Press L or M to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
4. Press L or M to highlight GAME TIMER.
5. Press or to select a time limit (30 minutes, 60 minutes, 90
minutes, 120 minutes, or OFF.)
6. Press EXIT to return to normal viewing. After the GameTimer is
programmed, the display will
appear briefly every ten minutes to
remind you that the GameTimer is
operating.
When the programmed time is
reached, the TV will change
channels automatically and enter
VIDEO LOCK mode.
J3S40121B(E)_P24-30 27
or to display the LOCKS menu.
or to display the LOCKS menu.
TM
feature, you can automatically activate the
or to display the LOCKS menu.
Note:
After programming VIDEO LOCK, change
channels or press the TV/VIDEO key before
turning off the television.
or to
Notes:
• Interactive video games that involve
shooting a gun type of joy-stick at an on-
screen target may not work on this TV.
• To deactivate the GameTimer, set the
VIDEO LOCK to OFF (see "Locking the
video inputs" above.)
27
24/02/2005, 6:06 PM
TV/Video
Channel
Numbers
Menu/
Enter
Exit