Selecting The Sound - Toshiba D-R4SC Owner's Manual

Playback
DVD-RAM DVD-RW DVD-R DVD-VIDEO

Selecting the sound

You can select a preferred language and a sound format.
Start
OPEN/CLOSE
DISPLAY FL SELECT DIMMER
SUBTITLE
ANGLE AUDIO/SAP
REMAIN REC MODE EXTEND
SETUP
VOL
TIMESLIP
MUTE INPUT SELECT
EASY
TOP MENU
NAVI
SELECT/
ENTER
INSTANT
REPLAY
QUICK MENU
SKIP REV STOP
REV PLAY
REC
SEARCH ADJUST
T
1 3
2
4 5 6
7 8 9
MTS Broadcast Compatibility
This recorder can receive or record MTS (Multichannel TV sound) broadcast.
By connecting the recorder to your stereo system or stereo TV, you will try the SAP or stereo sound.
SAP (Second Audio Program broadcast)
A separate audio program, usually broadcast in a second language with the main language.
Sounds in playback
You can play SAP and/or stereo broadcasts with this recorder. Refer to steps 1 and 2 to select a desired audio.
While a SAP program is received, the SAP indicator on the front panel illuminates.
VCD
1
Press AUDIO/SAP during playback or while
receiving a broadcast.
PROGRESSIVE
FREEZE
AUDIO/SAP
ZOOM
2
Press ADJUST while the audio setting is
CH
displayed on the TV screen.
MENU
ADJUST
TV
DVD
INSTANT
SKIP
SKIP FWD
FWD
CHP DIVIDE
+ 10
0
CLEAR
The current audio setting appears.
The language code appears instead of the language
name. Refer to the list of languages and their
abbreviations. ( page 126)
Variation of channels depends on the disc or the type of
TV broadcast.
DVD-RAM
• , TV channel signals
Stereo sound
→ "Stereo" (left channel and right channel)
→ "Stereo L" (left channel)
→ "Stereo R" (right channel)
(→ Back to "Stereo")
SAP sound
"Main" → "SAP" → "Main + SAP" (→ Back to "Main")
DVD-RW DVD-R DVD-VIDEO
Language name / sound recording system / No. of
channels
e.g.
Sound 1 English 2ch
Output PCM
VCD
•
"Stereo" → "Stereo L" → "Stereo R" (→ Back to "Stereo")
The display turns off if you do not operate for more than
3 seconds.
If you press the / buttons to select "Output," you can
select the audio output setting (
ADJUST buttons.
page 114) by using
67