1. Manuals
  2. Brands
  3. Dell Manuals
  4. Desktop
  5. INSPIRON Inspiron 5000
  6. Service manual

Dell 5000 Service Manual

Embedded box pc
Hide thumbs Also See for 5000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual, User Manual
Dell Embedded Box PC
5000
Service Manual
Regulatory Model: N01PC
Regulatory Type: N01PC001

Advertisement

Table of Contents
loading

Related Manuals for Dell 5000

Summary of Contents for Dell 5000

  • Page 1 Dell Embedded Box PC 5000 Service Manual Regulatory Model: N01PC Regulatory Type: N01PC001...
  • Page 2 A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.

  • Page 3: Table Of Contents

    Contents 1 Before working inside your Embedded Box PC.................9 Before you begin..................................9 Safety instructions.................................9 Recommended tools................................10 Screw list....................................10 2 After working inside your Embedded Box PC................. 12 3 Technical overview........................13 System-board components..............................13 4 Removing the back cover......................14 Procedure....................................14 5 Replacing the back cover......................16 Procedure....................................16 6 Removing the hard-drive cage......................17...
  • Page 4 12 Removing the interposer board....................24 Prerequisites..................................24 Procedure..................................... 24 13 Replacing the interposer board....................25 Procedure..................................... 25 Post-requisites ..................................25 14 Installing a PCI/PCIe card......................26 Prerequisites..................................26 Procedure..................................... 26 Post-requisites ..................................28 15 Removing the PCI/PCIe card..................... 29 Prerequisites..................................29 Procedure..................................... 29 16 Replacing the PCIe card......................
  • Page 5 Procedure..................................... 43 24 Replacing the WWAN-antenna connectors..................45 Procedure..................................... 45 Post-requisites ..................................45 25 Removing the WWAN card......................46 Prerequisites..................................46 Procedure..................................... 46 26 Replacing the WWAN card......................48 Procedure..................................... 48 Post-requisites ..................................49 27 Removing the SIM card......................50 Prerequisites..................................50 Procedure.....................................50 28 Replacing the SIM card......................51 Procedure....................................51 Post-requisites ..................................
  • Page 6 Procedure..................................... 63 36 Replacing the intrusion switch....................64 Procedure..................................... 64 Post-requisites ..................................64 37 Removing the serial ports......................65 Prerequisites..................................65 Procedure.....................................65 38 Replacing the serial ports......................67 Procedure..................................... 67 Post-requisites ..................................67 39 Removing the bottom cover...................... 68 Prerequisites..................................68 Procedure..................................... 68 40 Replacing the bottom cover......................
  • Page 7 Entering the Service Tag in the BIOS setup program....................90 55 BIOS setup program......................... 92 Entering BIOS setup program............................92 Clearing forgotten passwords............................92 Clearing CMOS settings..............................93 56 Removing the Dell logo board....................95 Prerequisites..................................95 Procedure.....................................95 57 Replacing the Dell logo board.....................98 Procedure..................................... 98 Post-requisites..................................98...
  • Page 8 Peripherals....................................99 WLAN/WWAN...................................100 Zigbee....................................100 CANbus....................................100 Contents...

  • Page 9: Before Working Inside Your Embedded Box Pc

    You should only perform troubleshooting and repairs as authorized or directed by the Dell technical assistance team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. See the safety instructions that shipped with the product or at www.dell.com/regulatory_compliance.

  • Page 10: Recommended Tools

    CAUTION: Press and eject any installed card from the media-card reader. Recommended tools The procedures in this document may require the following tools: • Philips screwdriver • Flat-head screwdriver • Plastic scribe • Hex screwdriver • 8 mm open wrench •...
  • Page 11 Component Secured to Screw type Quantity Hard-drive cage Back cover M3x5 Top hard drive/solid-state drive Hard-drive cage STDF(L5.1), M3x3 Bottom hard drive/solid-state Hard-drive cage STDF(L5.1), M3x3 drive Solid-state drive interposer board Solid-state drive carrier M2x3 Solid-state drive Solid-state drive carrier M2x3 Wall-mount bracket Back cover...

  • Page 12: After Working Inside Your Embedded Box Pc

    After working inside your Embedded Box PC CAUTION: Leaving stray or loose screws inside your Embedded Box PC may severely damage your Embedded Box PC. 1. Replace all screws and ensure that no stray screws remain inside the Embedded Box PC. 2.

  • Page 13: Technical Overview

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • System-board components System-board components 1.

  • Page 14: Removing The Back Cover

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure Procedure 1.
  • Page 15 1. back cover 2. hard drive/Solid-state drive assembly 3. routing guide 4. SATA-data cable 5. SATA-power cable 5. Close the back cover partially and push the back cover forward to release it from the tabs on the chassis. 6. Lift the back cover off the chassis. a.

  • Page 16: Replacing The Back Cover

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure Procedure 1.

  • Page 17: Removing The Hard-Drive Cage

    PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Hard drives/solid-state drives are fragile. Exercise care when handling the Solid-state/hard drive. CAUTION: To avoid data loss, do not remove the hard drive/solid-state drive while the Embedded Box PC is in sleep or on state.

  • Page 18: Replacing The Hard-Drive Cage

    PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Hard drives/solid-state drives are fragile. Exercise care when handling the Solid-state/hard drive. Topics: •...

  • Page 19: Removing The Drives From The Hard-Drive Cage

    PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Hard drives/solid-state drives are fragile. Exercise care when handling the Solid-state/hard drive. CAUTION: To avoid data loss, do not remove the hard drive/solid-state drive while the Embedded Box PC is in sleep or on state.
  • Page 20 1. back cover 2. STDF (L5.1), M3x3 screws(4) 3. drive cage 4. hard drive/solid-state drive Removing the drives from the hard-drive cage...

  • Page 21: Replacing The Drives In To The Hard-Drive Cage

    PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Hard drives/solid-state drives are fragile. Exercise care when handling the Solid-state/hard drive. Topics: •...

  • Page 22: Removing The Solid-State Drive From Bracket

    PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive. Topics: •...

  • Page 23: Replacing The Solid-State Drive In To Bracket

    PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive. Topics: •...

  • Page 24: Removing The Interposer Board

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...

  • Page 25: Replacing The Interposer Board

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 26: Installing A Pci/Pcie Card

    PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: PCI/PCIe cards are fragile. Exercise care when handling the cards. Topics: •...
  • Page 27 1. M3x5 countersunk screw 2. PCI/PCIe filler-plate bracket 3. filler plate 4. chassis 5. Install the PCIe or PCI cards in their respective slots on the riser board. a. riser card b. PCIe card slot c. PCIe card 6. Replace the filler plate for an empty card slot. 7.

  • Page 28: Post-Requisites

    1. filler bracket 2. bracket 3. chassis 4. M3x5 countersunk screw 9. Replace the screws that secure the PCIe card and the filler plate to the chassis. a. chassis b. filler plate c. M3x5 countersunk screws (2) Post-requisites Follow step 2 to step 8 in “Replacing the back cover”.

  • Page 29: Removing The Pci/Pcie Card

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...
  • Page 30 1. M3x5 countersunk screw 2. bracket 3. filler plate 4. chassis 5. Release the PCI/PCIe card from the PCI/PCIe card slot on the riser card and lift it off the chassis. 1. PCIe card 2. PCIe card-slot 3. riser card 4.

  • Page 31: Replacing The Pcie Card

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 32: Post-Requisites

    1. filler plate 2. fillet-plate bracket 3. chassis 4. M3x5 countersunk screw 5. Replace the screws that secure the PCI/PCIe card and the filler plate to the chassis. a. chassis b. filler plate c. M3x5 countersunk screws (2) Post-requisites Follow step 2 to step 8 in “Replacing the back cover”.

  • Page 33: Removing The Memory Module

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...
  • Page 34 c. securing clips (2) Removing the memory module...

  • Page 35: Replacing The Memory Module

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 36: Post-Requisites

    Post-requisites 1. Replace the PCI/PCIe card (if necessary). 2. Follow step 2 to step 8 in “Replacing the back cover”. Replacing the memory module...

  • Page 37: Removing The Wlan-Antenna Connectors

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...
  • Page 38 a. antenna cables b. routing guide c. WLAN card Removing the WLAN-antenna connectors...

  • Page 39: Replacing The Wlan-Antenna Connectors

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 40: Removing The Wlan Card

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...

  • Page 41: Replacing The Wlan Card

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 42: Post-Requisites

    1. tab 2. notch 3. WLAN card 4. WLAN-card bracket 5. M2x3 screws (2) 6. WLAN-antenna cables (2) Post-requisites 1. Replace the PCI/PCIe card (if necessary). 2. Follow step 2 to step 8 in “Replacing the back cover”. Replacing the WLAN card...

  • Page 43: Removing The Wwan-Antenna Connectors

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...
  • Page 44 a. WWAN-antenna cables (2) b. routing guide c. WWAN card Removing the WWAN-antenna connectors...

  • Page 45: Replacing The Wwan-Antenna Connectors

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 46: Removing The Wwan Card

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...
  • Page 47 3. mPCIE1 slot 4. M2x3 screws (2) Removing the WWAN card...

  • Page 48: Replacing The Wwan Card

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 49: Post-Requisites

    1. tab 2. notch 3. M2x3 screws (2) 4. WWAN card 5. WWAN-antenna cables (2) Post-requisites 1. Replace the PCI/PCIe card (if necessary). 2. Follow step 2 to step 8 in “Replacing the back cover”. Replacing the WWAN card...

  • Page 50: Removing The Sim Card

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...

  • Page 51: Replacing The Sim Card

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...
  • Page 52 2. Follow step 2 to step 8 in “Replacing the back cover”. Replacing the SIM card...

  • Page 53: Removing The Canbus Cable

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...
  • Page 54 3. routing guides 4. CANbus-cable connector Removing the CANbus cable...

  • Page 55: Replacing The Canbus Cable

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 56: Removing The Canbus Card

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...
  • Page 57 1. CANbus card 2. CANbus cable 3. mPCIE1 slot 4. system board 5. M2x3 screws (2) Removing the CANbus card...

  • Page 58: Replacing The Canbus Card

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 59: Post-Requisites

    Post-requisites 1. Replace the PCI/PCIe card (if necessary). 2. Follow step 2 to step 8 in “Replacing the back cover”. Replacing the CANbus card...

  • Page 60: Removing The Coin-Cell Battery

    After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Removing the coin-cell battery resets the BIOS setup program’s settings to default. It is recommended that you note the BIOS setup program’s settings before removing the coin-cell battery.
  • Page 61 c. coin-cell battery Removing the coin-cell battery...

  • Page 62: Replacing The Coin-Cell Battery

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 63: Removing The Intrusion Switch

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...

  • Page 64: Replacing The Intrusion Switch

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 65: Removing The Serial Ports

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...
  • Page 66 a. chassis b. serial-port connector c. system board Removing the serial ports...

  • Page 67: Replacing The Serial Ports

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 68: Removing The Bottom Cover

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...

  • Page 69: Replacing The Bottom Cover

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 70: Removing The Riser Card

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...
  • Page 71 a. riser-card bracket b. screws (2) c. riser card Removing the riser card...

  • Page 72: Replacing The Riser Card

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...
  • Page 73 Figure 1. DIP switch settings with two PCIe(x8) cards 1. DIP switch 2. CPU board Replacing the riser card...

  • Page 74: Post-Requisites

    Figure 2. DIP switch settings with other riser cards 1. DIP switch 2. CPU board 1. Align the screw holes on the bracket with the screw holes on the riser card. 2. Replace the screws that secure the bracket with the riser card. 3.

  • Page 75: Removing The Heat Sink

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...

  • Page 76: Replacing The Heat Sink

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 77: Removing The Power Connectors

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...
  • Page 78 1. chassis 2. barrel connector 3. routing guide 4. M2.5x2 screw 5. power cable 6. grounding cable 6. Remove the screws that secure the power connector to the chassis. 7. Route the power cables along with the barrel connector through the slot on the chassis and remove it from the chassis. a.

  • Page 79: Replacing The Power Connectors

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 80: Removing The Top Cover

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...
  • Page 81 4. Remove the top cover off the chassis. a. M3x5 countersunk screws (7) b. top cover c. chassis 5. Remove the power switch. Removing the top cover...

  • Page 82: Replacing The Top Cover

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 83: Removing The Power Switch

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...

  • Page 84: Replacing The Power Switch

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 85: Removing The Cpu Board

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites •...

  • Page 86: Replacing The Cpu Board

    Before working inside your Embedded Box PC. After working inside your Embedded Box PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure •...

  • Page 87: Removing The System Board

    After working inside your Embedded Box PC. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. NOTE: Your Embedded Box PC’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board.
  • Page 88 1. serial-port cable 2. SATA data-cable (2) 3. SATA power-cable (2) 4. system board 2. Remove the screws that secure the system board to the chassis. 1. chassis 2. system board 3. STDF(L8) HEX, M3x4 screws (5) 4. STDF(L15) HEX, M3x4 screws (1) 5.
  • Page 89 a. chassis b. system board Removing the system board...

  • Page 90: Replacing The System Board

    “Replacing the back cover”. Entering the Service Tag in the BIOS setup program 1. Turn on or restart the Embedded Box PC. 2. Press F2 when the Dell logo is displayed to enter the BIOS setup program. Replacing the system board...
  • Page 91 3. Navigate to the Main tab and enter the Service Tag in the Service Tag Input field. Replacing the system board...

  • Page 92: Bios Setup Program

    Before turning on the Embedded Box PC, connect the keyboard, mouse, and monitor to the Embedded Box PC, or connect the Embedded Box PC through the KVM session or use Dell Wyse Cloud Client Manager (CCM) or Dell Command | Monitor (DCM) to update the BIOS configuration.

  • Page 93: Clearing Cmos Settings

    a. jumper plug 8. Follow step 2 to step 9 in “Replacing the back cover”. Clearing CMOS settings 1. Follow step 1 to step 6 in “Removing the back cover”. 2. Locate the CMOS reset jumper (CMOS) on the system board. See “System-board components”.
  • Page 94 a. jumper plug 8. Follow step 2 to step 8 in “Replacing the back cover”. BIOS setup program...

  • Page 95: Removing The Dell Logo Board

    Removing the Dell logo board NOTE: Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded Box PC and follow the steps in Before working inside your Embedded Box PC. After working inside your Embedded Box PC,...
  • Page 96 M3x6 screws (7) c. front chassis 2. Remove the screws that secure the Dell logo board to the front chassis. a. M3x5 screws (3) b. front chassis 3. Remove the Dell logo board from the front chassis.
  • Page 97 Dell logo board b. front chassis Removing the Dell logo board...

  • Page 98: Replacing The Dell Logo Board

    1. Place the Dell logo board into the front chassis. 2. Replace the screws that secure the Dell logo board to the chassis. 3. Align the screw holes on the left chassis with the screw holes on the front chassis.

  • Page 99: Technology And Components

    Power The Dell Embedded Box PC is shipped with the 12-26V DC power adapter. Processor The Dell Embedded Box PC is shipped with Intel Celeron G3900E, Intel Core i3-6100E, Intel Core i5-6440EQ, and Intel Core i7-6820EQ processor. Mechanical The Embedded Box PC is optimized for fanless design, and easy wall/panel and DIN Rail Mount use. It provides easy access to connectors and switches.
  • Page 100 Dual-band 802.11b/g/n/ac+Bluetooth 4.1 LE • Dell Wireless DW5580 HSPA+ Zigbee The Zigbee USB module is a wireless mesh module for Dell Embedded Box PC. CANbus The CANBus daughter card is an optional accessory for Embedded Box PC. Technology and components...

Table of Contents