Adjusting The Sound; Muting The Sound; Selecting Stereo/Sap Broadcasts; Adjusting The Sound Quality - Toshiba 42HP66 Owner's Manual

Adjusting the sound

Muting the sound

Press MUTE to temporarily turn off the sound. While the sound is off,
the screen will display the word MUTE in the lower right-hand corner.
To restore the sound, either press MUTE again or VOL +/–.

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature provides high-fidelity stereo
sound. MTS also can transmit a second audio program (SAP) containing
a second language or other audio information (when available.)
Note: The MTS feature is not available in VIDEO mode.
When the TV receives a stereo or SAP broadcast, the word
"STEREO" or "SAP" displays on-screen every time you turn on
the TV, change the channel, or press DISPLAY.
To listen to stereo sound:
1. Press TV to select the TV mode.
2. Press MENU, then press
3. Press ▲ or ▼ to highlight MTS.
4. Press or to highlight STR (stereo.)
Notes:
• In general, you can leave your TV in stereo mode because the
TV automatically outputs the type of sound being broadcast
(stereo or mono.)
• If the stereo sound is noisy, select MONO to reduce the noise.
A U D I O
M T S S T R
B A S S 2 5
T R E B L E 2 5
B A L A N C E 0
S TA B L E S O U N D O F F
S P E A K E R S O N
S E L E C T A D J U S T
5. Press EXIT to return to normal viewing.
To listen to a second audio program (SAP):
1. Press TV to select the TV mode.
2. Press MENU, then press
3. Press ▲ or ▼ to highlight MTS.
4. Press or to highlight SAP. The TV speakers will output the
second audio program instead of normal audio.
5. Press EXIT to return to normal viewing.

Adjusting the sound quality

You can change the sound quality of your TV by adjusting the bass,
treble, and balance.
To adjust the sound quality:
1. Press TV to select the TV mode.
2. Press MENU, then press
3. Press ▲ or ▼ to highlight the item you want to adjust.
A U D I O
M T S S T E R E O
B A S S 2 5
T R E B L E 2 5
B A L A N C E 0
S TA B L E S O U N D O F F
S P E A K E R S O N
S E L E C T A D J U S T
4. Press or to adjust the level.
• makes the sound quality weaker or increases the balance in
the left channel, depending on the item selected.
• makes the sound quality stronger or increases the balance in
the right channel, depending on the item selected.
3X70701A_En_p32-41 41
or to display the AUDIO menu.
/ S A P / M O N O
or to display the AUDIO menu.
or to display the AUDIO menu.
INPUT DISPLAY
Note:
A second audio program (SAP) can be heard
only on those TV stations that offer it.
For example, a station might broadcast music
as a second audio program. If you have SAP
on, you will see the current program on the
screen but hear music instead of the
program's normal audio.
However, if you have SAP on, and the station
you are watching is not currently
broadcasting a second audio program, the
station's normal audio will be output;
however, occasionally there is no sound at all
in SAP mode. If this happens, set the MTS
feature to STEREO mode.
Note:
Adjusting the sound quality (bass, treble, and
balance) does not affect the sound that is
output from the variable audio OUT jack.
Note:
If the remote control does not operate your TV,
press the "TV" button on the remote control
and try again.
41
3/7/06, 6:25 PM
Mute
Display
TV
Volume +/–
Menu/Enter
Exit