Siemens QuickPic IQP-500 Manual page 3

QuickPic Camera IQP-500 (en)
2
You can use your QuickPic Cam-
era to take pictures spontane-
ously, then view them directly
on your mobile phone display.
The pictures can be
• stored in your mobile phone
(p. 6),
• sent by MMS from your mo-
bile phone to another mobile
(p. 6),
• e-mailed to an e-mail recipi-
ent or
• transmitted from your mobile
phone to a PC via the infrared,
Bluetooth™ or serial port
(p. 6).
You can spontaneously capture
any moment, share it with
friends and preserve it for pos-
terity.
Safety information
• Do not use your QuickPic
Camera at temperatures be-
low 0° C or above 50° C.
• Protect your QuickPic Camera
from moisture and dust.
• Use the carry strap provided
to avoid possible damage
caused by dropping the cam-
era.
Ensure that the mobile phone
is not connected to the cam-
era when you are using the
carry strap.
• Only connect the QuickPic
Camera to the mobile phone
to take pictures. Once con-
nected, the QuickPic Camera
is in stand-by mode. This
draws power from the mobile
phone.
• Use the protective case pro-
vided. This will protect the
lens from physical damage
(scratches) that can seriously
impair the quality of images.
• The QuickPic Camera is a sen-
sitive optical device and
should be handled with the
appropriate care.
• Avoid looking directly at the
flash.
• Only use the camera as shown
in the diagram on p. 4.
Do not open the camera
housing. This will invalidate
the warranty.