Advertisement
Luminaire Installation
1
Carefully unpack unit from its packaging. Properly
inspect for defects before installing. Wear work
gloves to prevent dirt and oil from being transferred
to the luminaire.
3
Bend the 4 clips to secure the luminaire in place.
Install the safety cables through the holes on the clips
(per local building codes, safety cables by others).
Electrical Connections
Risk of electrical shock. Disconnect power before servicing or installing product.
Risque de choc électrique. Couper l'alimentation avant le dépannage ou avant l'installation du produit.
WHITE
BLACK
GROUND
GREY
VIOLET
Safety cable
WARNING/AVERTISSEMENT
120-277V
COMMON
NEUTRAL
UNSWITCHED
LINE
GROUND
DIMMING (••)
DIMMING
0-10V
DIMMING (+)
2
Install the unit into the reserved hole in the ceiling.
Diffuser panel
4
The diffuser panel is engaged over 4 screws on both
ends of the LVT luminaire. It may become loose during
shipping or if the lumiare is signifcantly twisted during
install. It is important to make sure the diffuser is
completely engaged to avoid having it fall out after the
install is complete. Grasp diffuser and gently squeeze
together to re-engage over screws.
347V
RED
BLACK
GROUND
GREY
VIOLET
Screw is disengaged
Screw is engaged
Squeeze
COMMON
NEUTRAL 347V
UNSWITCHED
LINE 347V
GROUND
DIMMING (••)
DIMMING
0-10V
DIMMING (+)
Advertisement
