Philips 32PFL5306/V7 User Manual page 14

Time
On Timer
Child Lock
Hotel Mode
Control
FEATURES
Change
code
E-sticker
Auto Setting
Phase
Manual Clock
Factory
Settings
Display the On time, press Ok key to enter and
Time
Select Activate - On ,set time(HH:MM)
Channel no.(1-200) on given time set will be released from standby
Channel No.
and entered channel will be displayed as on channel.
Activate
Select Activate - ON/OFF
Clear All
Select this option to reset all Timer options except
Make the child lock switch On to lock the source/channel
Child Lock Switch
Note: Setup menu is disabled when Child Lock switch is On.
Select the sources to be locked with up/down key on
Video Lock
remote and press OK to set/clear lock
Select this option to reset all Parental options
Clear All
to default
Make this switch On to Activate the Hotel Mode options selected
Hotel Mode Switch
by User, When Switch is Off the Hotel Mode options will not
Operate
Making this option On, the Display OSD will not be displayed by
OSD Display Disable
by Info Key
Making this option On, the search options/Installation menu will be
Disable Search
disabled for user
The main volume is limited by setting MAX volume,User cannot increase
Max Vol
the main volume greater than MAX volume selected
Select the power on volume, after the TV mains On the power
Power On Vol
on volume will be same as specified here
Power On source
Select the power on source, after the TV mains On
Select the power on channel , after the TV mains On the power on
Power On Channel
channel will be same as specified here.Power on channel will be
disabled when source is changed.
Key Lock
Select this option On, all the panel keypad will not operate
Clear All
Select this option to reset all Hotel Mode options to default
Select this option to change the password (default - 0000) enter new password and confirm
the same.
Switch the E-sticker on or off.(For shop mode only).
Auto setting allows the PC screen of TV to self adjust. This automatically
sets the H-position ,V- position, Phase and clock
Note:Only applicable for VGA mode
If picture is not Ok with auto setting then adjust Horrizontal position /
Vertical position manually to adjust the desired picture settings.
Note:Only applicable for VGA mode.
Select this switch to reset the user menu. To reset Child lock / hotel mode menu select
Clear all option in respective menu
adjust the time (HH:MM) format
.
EN 13