Yamaha DM 1000 Startup Manual page 11

ESAM-II as "machine commands." If the video editor is using "source commands"
to control the system, you must match the channel settings specified by the video
editor. Some video editors allow you to choose whether to use "machine
commands" or "source commands." If your video editor supports both source
commands and machine commands, we recommend that you set it to transmit and
receive machine commands.)
In the DISPLAY ACCESS section, press the [REMOTE] key repeatedly to access
the ESAM1-32 (ESAM MACHINE ASSIGN CH1-32) page and ESAM33-48
(ESAM MACHINE ASSIGN CH33-48) page of the REMOTE screen.
Assign 1,2,3,4 to machine A; 5,6,7,8 to machine B; and 9,10,11,12 to machine C.
On the video editor as well, there are settings that let you match video recorders
and machine names (machine numbers). Assign machine A as the first machine of
the editor, so that the machine assignments of the video editor will match the
machine assignments on the DM1000. If the correct assignments have not been
made, the wrong machine (channel) will be controlled.
11