Philips 27PT9007D/17E Connection Manual

Use this guide to achieve the optimal connection for each of your components.
TV can support these different types of cable connection. Please check your
device to see which one applies.
Better Good
Component Video S-Video
Input (CVI)
Supplies a better picture
than RF and composite
Provides superior picture
connections. Used with
quality by separating the
red/white audio cables.
green, blue and red
Note: The color of audio
luminance signals. Typically
inputs may differ, e.g.
used with red/white audio Red/white or red/back.
cables.
Connecting Set-Top Box to TV
Basic
Provides a basic
connection
for antenna or cable.
Provides both audio
and video.
Cable Signal IN
from Cable Company
75 Input
TV
Basic Basic
Composite Audio/
Video
Provides a basic
Separate video (yellow) and connection
audio (red/white) cables that for antenna or cable.
provide a basic connection from Provides both audio
the set-top box and other devices.
and video.
Note: The color of audio inputs
may differ, e.g. Red/white or
red/back.
Connect RF cable Use second RF cable to
from wall to input at connect the set-top box
the back of the set-top to the TV input (75 ).
box.
Note: This connection
gives mono sound. For
stereo sound use also
Set the out channel of
composite audio/video
the set-top box to CH 3
connection (refer to
or 4 if available.
panel 2).
Press the Ana/Dig button
on the remote control to
set the TV to analog mode.
Set the TV to the same
channel as the set-top
box output channel.
Change the channels at
Back of Set-top Box the set-top box to view
the program.