Advertisement
The following steps will confirm at least one strong path to the Ethernet connected Gateway or router
6. Download and launch the AirTies WiFi app to your mobile device or iPad.
Allow up to 1 minute for the app to locate the active AP device and mesh links. Connect to the
AirTies wireless Network on your mobile device and enter the password located on the bottom of the
primary AP (the one plugged into the Gateway/router). You will receive an email that includes an
activation code. Navigate to My Network to establish the speed and signal strength for each mesh
link.
7. Adjust the AP locations until each APs upstream and downstream path to the primary AP exceeds
500Mbps. If a 500Mbps path is not achievable, connect the relay (2
APs with Cat5/6 cable to deliver significantly higher throughput versus WiFi.
NOTE: APs must first be linked wirelessly in a mesh network prior to connecting them with Cat
5/6 cable.
8. Navigate to My Wi-Fi Settings to set the desired SSID and password for the Wi-Fi network which uses a
single SSID for both 2.4 and 5GHz networks.
10. Navigate to Application Settings > Service Settings to check (enable) the remote monitoring feature.
For over-the-phone support options, please contact Pioneer Telephone at 1-888-782-2667.
It may take up to 24-hours for your new WiFi Mesh system to optimize to your network!
nd
or additional) AP and primary
Advertisement
