Advertisement
INTUITY AUDIX LX Release 1.0
Centrex Integration
6
Setting the 202T Modem
Setting Options for the AT&T Dataphone 202T Modem
3. To replace the top cover, complete the following Steps a and b:
4. Set the front dial to DATA (see
Figure 6-4. Front Panel of the Motorola 202T Modem Showing the Dial Setting for
DATA
5. Continue with
Setting Options for the AT&T
Dataphone 202T Modem
The AT&T Dataphone 202T modem has three switches — S2, S3, and S4 — that
you must set before installing the integration hardware.
Location of Switches
Figure 6-5
a. Line up the guides with the front and back panels.
The guide for the front panel is slightly farther from the edge of the
cover.
b. Slide the cover into place.
The cover clicks when the latches are secure.
NOTE:
Installers in Canada should replace the screw or the locking
tabs.
Chapter 7, Hardware Installation for Centrex Switch
Integration with the 202T
shows the location of the switches.
Figure
6-4).
Modem.
Issue 1
May 2002
Page 6-7
Advertisement
