Table of Contents
Advertisement
Switch on
1
On the TV and other connected devices, turn
on the HDMI-CEC operations. For details,
see the manual of the TV or other devices.
2
Press
(Home).
3
Select [Setup], and then press
4
Select [EasyLink] > [EasyLink], and then
press
.
5
Select [On], and then press
Control devices
Control the SoundBar and the other connected
HDMI-CEC compliant devices with a single
remote control.
One-touch play
If you enable One-touch play, the TV
automatically switches to the correct channel
when you play a video in your SoundBar.
One-touch standby
When you press and hold
the remote control, the SoundBar and all the
connected HDMI-CEC devices (that support
one-touch standby) switch to the standby mode.
If one-touch standby is enabled on your
SoundBar, you can switch to standby with the
remote control of the TV or other HDMI-CEC
devices.
Auto Power On From TV
If auto power from TV is enabled on your
SoundBar, you can turn on your SoundBar when
you press and hold the
remote control.
System Audio Control
When you play a device that has its audio output
routed to the SoundBar, turn on System Audio
control and select audio source through your
connected device.
To use one-touch audio, turn on System Audio
Control and select audio source through your
connected device.
EN
20
.
.
(Standby) on
(Standby) on the TV
Play audio from SoundBar
Play the audio from a connected device through
your SoundBar.
1
Press
(Home).
2
Select [Setup], and then press
3
Select [EasyLink] > [System Audio Control]
> [On], and then press
4
Press AUDIO SOURCE button on your
remote control to select the audio output for
the connected device.
•
AUX: Switch your audio source to the
AUX connection.
•
: Switch your audio source to the
coaxial connection.
•
: Switch your audio source to
the optical connection. Press twice to
switch to HDMI ARC source when your
SoundBar is connected to the TV through
an HDMI ARC connection.
5
Press
to confirm.
Note
•
To play TV audio from your SoundBar through
HDMI ARC connection, select the correct video
input on the TV and turn off the TV speakers
(see 'Connect to TV' on page 9).
•
For details, see the TV user manual.
.
.
Advertisement
Table of Contents
