[Display Dim]
Changes the brightness level of the display
panel on this Home Theater System.
•
[100%] – Normal brightness.
[70%] – Medium brightness.
•
•
[40%] – Dimmest display.
[OSD Language]
Selects the default on-screen menu language.
[Screen Saver]
Turns off or on the screen saver mode. Helps
to protect the TV screen from being damaged
due to over exposure to a static image for too
long.
[On] – Sets the screen saver to appear
•
after 15 minutes of inactivity (for
example, in pause or stop mode).
[Off] – Disables screen saver mode.
•
[Sleep Timer]
Switches to standby automatically after the
preset time.
[15 mins] , [30 mins] , [45 mins] , [60 mins]
•
– Selects the count down time before
the Home Theater System switches to
standby.
•
[Off] – Disables sleep timer mode.
[DivX(R) VOD Code]
Displays the DivX® registration code.
Tip
•
Enter this Home Theater System DivX
registration code when you rent or purchase
video from www.divx.com/vod. The DivX
videos rented or purchased through the
DivX® VOD (Video On Demand) service
can be played only on the device to which it is
registered.
EN
28
Audio setup
Audio Setup
Speakers Volume
Speakers Delay
Night Mode
CD Upsampling
1
SETUP .
Press
» [General Setup] menu is displayed.
2
to select [Audio Setup] , then
Press
press .
3
Select an option, then press OK .
4
Select a setting, then press OK .
•
To return to the previous menu,
BACK .
press
•
To exit the menu, press
Note
•
See the explanations of the above options in
the following pages.
[Speakers Volume]
Sets the volume level of each speaker to get
the ideal audio balance.
1) To start, press OK .
2) Select a speaker in the menu, then press
to adjust the volume level.
3) Press OK to confi rm and exit.
Note
•
The test tone is emitted from the speaker
which you adjust.
SETUP .