Speaker Settings; Restore Default Settings; Update Software; Check Software Version - Philips HTS3592/93 User Manual

Speaker settings

1
( Home ).
Press
2
Select [Setup] , and then press OK .
3
Select [Advanced] , and then press OK .
4
Press the Navigation buttons and OK to
select and change:
•
[Enhanced audio] : Select [On] to enable
audio post processing at the speaker and
enable karaoke settings (if your product
supports Karaoke). To play the original
audio of the disc, select [Off] .
Tip
•
Enable audio post processing before you select a
predefi ned sound mode (see 'Sound mode' on page
16 ) .

Restore default settings

1
( Home ).
Press
2
Select [Setup] , and then press OK .
3
Select [Advanced] > [Restore default
settings] , and then press OK .
4
Select [OK] , and then press OK to confi rm.
» Your home theater is reset to its default
settings except for some settings such
as parental control and DivX VOD
registration code.
6

Update software

Philips continually tries to improve its products.
To get the best features and support, update your
home theater with the latest software.
Compare the version of your current software with
the latest version on www.philips.com/support. If
the current version is lower than the latest version
available on the Philips support website, upgrade
your home theater with the latest software.
Caution
•
Do not install a lower version of software than
the current version installed on your product.
Philips is not liable for problems caused due to
software downgrade.

Check software version

Check the version of the current software installed
on your home theater.
1
Press ( Home ).
2
Select [Setup] , and then press OK .
3
Select [Advanced] > [Version information] .
» The software version is displayed.

Update software through USB

What you need
•
A USB fl ash drive that is FAT or NTFS-
formatted, with at least 75MB of memory. Do
not use a USB hard drive.
•
A computer with Internet access.
•
An archive utility that supports the ZIP fi le
format.
Step 1: Download the latest software
1
Connect a USB fl ash drive to your computer.
2
In your web browser, go to www.philips.com/
support.
3
At the Philips Support website, fi nd your
product and locate the Software and drivers .
» The software update is available as a zip fi le.
EN 19