Table of Contents
Advertisement
Cleaning and care
Cleaning the ventilation gaps
A build-up of dust will increase the en-
ergy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (e.g. use the
dusting brush for Miele vacuum
cleaners)
Cleaning the door seal
Risk of damage as a result of in-
correct cleaning.
If you treat the door seal with oils or
grease, it can become porous.
Do not use any oils or grease on the
door seal.
The door seal should be cleaned reg-
ularly with clean water and then
wiped dry with a cloth.
36
Cleaning the compressor and
metal grille at the back of the
appliance
A build-up of dust will increase the en-
ergy consumption of the appliance.
Risk of damage as a result of in-
correct cleaning.
Cables and other components can
get broken off, bent or damaged.
Carefully clean the compressor and
metal grille.
The compressor and metal grille at the
back of the refrigeration appliance (heat
exchanger) should be dusted at least
once a year.
Starting up the appliance after
cleaning
Slide all shelves back into the appli-
ance.
Reconnect to the mains and switch
the appliance back on.
Switch on the Super freeze function
for a while so that the freezer section
can cool down quickly.
Once the temperature in the freezer
has reached the required temperat-
ure, place the food back in the freezer
drawers and put them back in the
freezer. Then close the appliance
door.
Switch off the Super freeze function
as soon as the temperature in the
freezer is a constant -18 °C or colder.
Hide quick links:
Advertisement
Table of Contents
