Naming A Scene; Excluding Channels From A Scene - Philips LIGHTOLIER CONTROLS LYTESCENE ILSCLTSII User Manual

L S II T S
YTE CENE OUCH CREEN

Naming a Scene

Each Scene button can be named for easier identification in the touch screen environment.
To name a Scene:
Step 1. At ILS Master window, press
Step 2. At Setup window, press
Step 3. At Scene section, select desired Scene using drop-down menu.
Step 4. Use
launch keypad and enter a custom name.
Step 5. Press
Select scene
Check boxes to
exclude channels
from selected scene

Excluding Channels From a Scene

Any channel can be excluded from any Scene. If a channel is excluded from a Scene, its level will not
change when that Scene button is pressed. This will allow a single unit to control two rooms with some
Scenes in one room, some in the other, and some in both.
To exclude a channel(s):
Step 1. At ILS Master window, press
Step 2. At Setup window, press
Step 3. At Scene section, select desired Scene using drop-down menu.
Step 4. At channel exclusion section, check boxes for any channels you wish to exclude
from selected Scene.
Step 5. Press
U ' G
SER S UIDE
Scenes
drop-down menu to select desired name or tap inside name field to
Name
.
OK
Press to launch Setup window
Scenes
.
OK
tab.
Configure Master
tab.
Select name from drop-down menu or double-tap
inside name field to enter a custom name
tab.
Configure Master
tab.
C M
ONFIGURING A ASTER
1 7