Page 2
Readykey K6199-CNCii | Firmware Update Kit | 1.0 Description EN | 2 1.0 Description Figure 1: Multi-Site Central Network Controller Do not attempt this update unless the PC software (such as Readykey for Windows) is the current version. Use the supplied EPROM to update the firmware contained in an existing Multi-Site MKII Central Network Controller to the current production version.
Page 3
Readykey K6199-CNCii | Firmware Update Kit | 2.0 Installation EN | 3 Figure 2: Removing the EPROM 2.0 Installation Use anti-static handling precautions at all times while following this procedure. Discharge any static build-up by touching the metal backplate. Keep all components in their packaging until needed.