Set Up A Network; Use Philips Easylink; Play; Play A Disc - Philips BDP3080/98 User Manual

Set up a network

To enjoy software updates of this product and
BD-Live for certain Blu-ray discs, set up the network
connection.
Note
•
Ensure that the network cable is properly connected and
the router is switched on.
1
Connect this product to the broadband
modem or router.
2
Press to display the home menu.
3
Select [Setup] and press OK.
Network Installation
Video Setup
View Network Settings
Audio Setup
Network Setup
EasyLink Setup
Preference Setup
Advanced Setup
4
Select [Network Setup], and press .
5
Select [Network Installation], and press OK.
6
Follow the on-screen instructions to complete
the network installation.
Tip
•
You can check the status of the wired connection of this
product (see "Adjust settings" > "Network Setup" >
[View Network Settings]).
Note
•
Loading BD-Live content from the internet may take
some time, depending on the file size and the speed of
the internet connection.

Use Philips EasyLink

This product supports Philips EasyLink which uses the
HDMI CEC (Consumer Electronics Control) protocol.
You can use one single remote control to control
EasyLink-compliant devices that are connected
through HDMI connectors.
Note
•
To enable the EasyLink feature, you must turn on the HDMI
CEC operations on the TV and on other devices connected
to TV. Refer to the TVs/devices manual for details.
One-touch play
1
Press (standby) to turn on this product.
»
The TV (if the TV supports one-touch play)
automatically turns on and switches to the
correct video-in channel.
»
If a disc is loaded in this product, disc play
automatically starts.
One-touch standby
1
Press and hold (standby) for more than 3
seconds.
»
All the connected devices (if the device
supports one-touch standby) automatically
switch to standby.
Note
•
Philips does not guarantee interoperability with other
HDMI CEC devices.

5 Play

Play a disc

Caution
•
Do not place any objects other than discs into the disc
compartment.
1
Press on the front panel to open the disc
compartment.
• You may also press and hold
remote control to open/close the disc
compartment.
2
Insert a disc with its label facing up.
3
Press to close the disc compartment and
start disc play.
• To view disc play, turn on the TV to the
video input.
• To stop disc play, press
on the
.
EN 11