Advertisement
Figure 3
1. Locknut (5/16 inch)
5.
Position the pivot frame upward, and secure the
pivot frame to the bottom of the machine frame
using 2 self-tapping screws (5/16 x 3/4 inch) as
shown in
Figure
4.
Figure 4
1. Self-tapping screw (5/16 x 3/4 inch)
6.
Tighten the 2 bolts (5/16 x 1 inch) and 2 locknuts
(5/16 inch) as shown in .
7.
Install the bent, flared end of a rod into the keyed
slot in the left side of the machine frame, and
move the rod rearward to seat it in the frame
(Figure
5).
Note:
Repeat this step for the right side of the
machine.
g302477
2. Bolt (5/16 x 1 inch)
g308797
Left side shown
8.
Insert the bent ends of the rods into the
attachment mount as shown in
secure the end of each rod with a washer and
hairpin cotter.
3
Figure 5
Figure 5
g308335
and
Advertisement
