Advertisement
TO USE FOR RECORDING ON AN EXTERNAL TAPE RECORDER (NOT INCLUDED)
You can easily use this instrument as a signal source for recording on an external
tape recorder (not included) by connecting the recorder to the TAPE OUT (32)
jacks provided on the rear panel of the main unit. These jacks are always connected
and the material being recorded is the same as that you hear on the speakers,
Note: The TAPE OUT jacks are internally wired in such a manner that they are not
effected by the settings of the VOLUME, BASS, BALANCE and TREBLE controls
on the front of the main unit. This means that you can set these controls for your
listening pleasure while recording without having any effect on the quality of your
recording.
TO USE THE STEREO HEADPHONE JACK
A STEREO HEADPHONEf!0) jack is provided on the front of the set. To use this
jack, plug in low impedance stereo headphones (not included) and adjust the
VOLUME, BALANCE, and TONE controls for your listening pleasure. Special
internal switches will turn off the speakers when you plug in the stereo headphones.
-
17
-
Advertisement
